 |
Eagle 2000 Commercial Slide Gate OperatorElectronic FeaturesAvailable Fail Safe or Fail Secure & 1/2 HP, 1 HP or Dual Motors. Standard Features 2-Wire Master/Slave with Global Inputs Open/Close Delay One Pass (No Tailgate) Motor Brake 24 VDC Output for MAG Lock 24 VAC Auxiliary Power Output Partial Open Stop-Reverse Auto-Close Timer (1-60 sec.) Power Eagle 2000 1/2 HP Continuous Duty AC 115 VAC @ 60 HZ 5.7 AMP Eagle 2000-1HP Dual 1/2 HP Continuous Duty AC 115 VAC @ 60 HZ 11.4 AMP Eagle 2000-DM Dual 1/2 HP Continuous Duty AC Motor 1 to Open / Moroe 2 to Close 115 VAC @ 60 HZ 5.7 AMP Gate Capacity & Operation Rated Continuous Duty Maximum Gate: 500 lbs & 22 ft 12" Per Second Travel Eagle 2000 (FSF and FSC) Maximum Gate: 1,000 lbs & 45 ft. Eagle 2000-1HP Maximum Gate: 2,000 lbs & 45 ft. Eagle 2000-DM Maximum Gate: 1,000 lbs & 45 ft. High Traffic Application Manual Release Fail-Safe (FSF): Push to open Eagle 2000 Fail-Secure (FSC): Use Crank to open Eagle 2000 Eagle 2000-1HP Eagle 2000-DM Mechanical Chain: #41 Nickel Plated (20') Gear Reducer: Size 50 Cover: All-Weather/UV Resistant (HDPE) Chassis: 1/4" Zinc Plated Steel to Resist Corrosion Power Disconnect (1/2 HP) Auxiliary 120 VAC Power Outlet Hardware No-Weld Chain Brackets UHMW Silent Idler Wheels Audio Alarm Pre-Wired Receiver Terminal Hand Crank (FSC Models Only) GENERAL SPECIFICATIONS With four models to choose from, Eagle-2000 is the reliable choice for all your commercial and industrial needs; combining big heavy gates with high traffic use for smooth powerful operation. Install Eagle-2000 for reliable power. Installation is made simple with the advanced features you most often need standard on every operator; features like Stop-Reverse allowing your transmitter to work like a 3-button station, or motor brake for added control on downhill applications. Dual gate Master/Slave operation has never been easier. Just two wires provide full Master/Slave communication. Global inputs between master and slave operators allow connection of any accessories to either the master or slave and the Diamond Control Board does the rest. |
 |
U.S. Gate Supply I: (818) 765-3636 This e-mail address is being protected from spambots. You need JavaScript enabled to view it. |
 |
U.S. Gate Supply II: (858) 271-7336 This e-mail address is being protected from spambots. You need JavaScript enabled to view it. |
 |
U.S. Gate Supply III: (951) 778-2500 This e-mail address is being protected from spambots. You need JavaScript enabled to view it. |
 |
U.S. Gate Supply IV: (805) 462-8877 This e-mail address is being protected from spambots. You need JavaScript enabled to view it. |
