DoorKing Inc. 9530 Maximum Security Slide Gate

Electronic Features

The model 9530 and 9550 operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. These operators include a speed control module which allows the user to set the speed of the gate from 1/2 to 4 feet/sec. Each of these operators have a slow-start and slow-stop function as well. Additionally, an emergency close input (model 9530 only) increases the gate speed up to 6 Ft./sec in the closing cycle.

Maximum gate length 100-feet.
Maximum gate weight 5000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Adjustable speed: 1/2 - 4 Ft./sec.
6 Ft./sec emergency close feature.
10:1 gear reduction running in a continuous oil bath.
Self adjusting disc brake with manual release.
3 HP continuous-duty motor.
208, 230 VAC three-phase only.
Operator is shipped with chain brackets and 20-feet of #60 chain.
Class III and IV applications only.
Compliant with UL 325 and 991 - but not yet listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 16"W x 34"H x 16"D

GENERAL SPECIFICATIONS

The model 9530 and 9550 operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only.