 |
All-O-Matic Battery Back-UpElectronic Features: The kit includes a DC Motor and a auxiliary control box. The kit will provide an emergency open cycle in the event of a power failure. The kit can be provided factory installed on the SL100, SW-300 and OH-200. It is also retrofitable in the field on these gate operators.GENERAL SPECIFICATIONS: The kit includes a DC Motor and a auxiliary control box. |
Gate Hardware
Parts & Accessories
 |
DoorKing 1400 Padlock Fire BoxElectronic Features DKS Padlock Boxes provide Fire Department access through automated gates or doors for emergency. GENERAL SPECIFICATIONS |
 |
DoorKing 1401 Knox KS-2 Key Switch Fire BoxElectronic Features DKS Lock Boxes provide Fire Department access through automated gates or doors for emergency. Fire Department lock boxes do not include the key switch. These must be procured from the respective authority. GENERAL SPECIFICATIONS |
 |
DoorKing 1402 Postal Lock BoxElectronic Features DoorKing Lock Boxes provide Postal Carrier access through automated gates or doors postal personnel. The postal lock box accepts the standard postal key lock. GENERAL SPECIFICATIONS |
 |
DoorKing Proximity Card ReadersElectronic Features DoorKing carries a full line of DKS, AWID and HID proximity card readers and cards. These readers output the card data to the access controller (1833, 1835, 1837 or 1838) where the decision to grant or deny access is made. These readers are ideal for both pedestrian and vehicular access control. Proximity cards transmit their information to the card reader without any physical contact. This provides an easy to use vandal resistant system. Access is granted when a valid card is presented to the card reader. GENERAL SPECIFICATIONS |
 |
EMX Carsense 101Electronic Features:Controls and indicators are mounted on the front panel, providing easy access and operation Available in 12V AC/DC, 24V AC or DC, 120 AC, 240V AC Low current consumption makes it excellent choice for solar power applications. Housed in a small, relay-type housing Excellent choice for solar power applications Surge protection Easy to use and install Easy upgrade or switch out to new devices Wide power supply options Energy conservation GENERAL SPECIFICATIONS: The Carsense 101 motion detector has a sensing probe that is buried in the ground so it is not noticed by potential intruders or vandals. It is housed in a small, relay-type housing making it easy to integrate with security control boards, gate and door operators. The Carsense 101 provides a solution for many vehicle detection challenges. Where safety is an issue, the Carsense 101 detects moving vehicles in an industrial environment where there are blind areas along the driving path and actuates warning lights. |
 |
EMX Infrared Modulated Photocell IRB-4XElectronic Features:Built in noise filter Power indicator LEDs Potentiometer range adjustment allows more precise tuning to site Wide 24o transmission angle allows easier alignment and increases reliability Through beam design is not affected by shiny surfaces Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt Reliability Longer range Improved interference rejection Precise tuning No focusing lens GENERAL SPECIFICATIONS: The IRB-4X photocell is used as a safety, reversing, or opening device in conjunction with automatic operators. The IRB-4X will work with any control board that accepts dry contact on the input. The easy to install IRB-4X is used with garage doors, rolling doors, parking barriers and other equipment. |
 |
EMX Lite Preformed Loop DetectorElectronic Features:
GENERAL SPECIFICATIONS: |
 |
EMX Retro-Reflective Photoeye NIRElectronic Features:• Flexible Voltage 12V AC/DC to 240V AC • Watertight Package • 30 Feet Range • 6 Foot Cord • Bracket and Mounting Hardware Included • Two LED Indicators • Sensitivity Adjustment • Compact Packaging Size: 2.5" High, 1.5" Deep, 0.75" Wide • Compact design, mounting hardware and indicators make it easy to install • Water-tight design allows for outdoor installation GENERAL SPECIFICATIONS: The NIR retro-reflective photoeye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers. |
 |
EMX Retro-Reflective Photoeye NIRPlusElectronic Features:
The NIRPlus™ retro-reflective photoeye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers. |
 |
EMX Vehicle Loop Detector D-TekElectronic Features:Easy installation Works with small operator housings Operates reliably with marginal loops Metal housing provides maximum durability and RF blocking Array of features and controls supports variety of applications. Surge protection Features Loop diagnostics Loop isolation transformer Loop conditioner Aluminum RF shield housing Loop frequency counter 10 gold plated sensitivity controls 8 gold plated function controls 6 gold plated controls for frequency, reset & frequency counter 2 high intensity LED indicators 2 relays pulse or presence Optional accessories include PR-Loop, HAR-7 and LD11 GENERAL SPECIFICATIONS: |
 |
Reno A&E AX Series Loop DetectorElectronic Features Single Relay output: Four levels of sensitivity GENERAL SPECIFICATIONS |
 |
Reno A&E AX2 / AX2DL Series Loop DetectorElectronic Features Single Relay output per channel:True Presence™ Pulse-on-Entry Four levels of sensitivity selectable from the front panel Sensitivity Boost for applications where high-bed vehicles might be encountered Power Down Memory: enables the detector to automatically track the status of the loop during power interruptions of any duration Fail LED indicates current loop failures or loop failures that have occurred Four loop frequencies selectable from the front panel Channel scanning Super bright LED indicators for power, detect/loop fail Single 11-pin connector or Dual 11-pin connector models available Fail-Safe or Fail-Secure versions available Directional Logic on AX2DL versions GENERAL SPECIFICATIONS |
 |
Reno A&E B Series Loop DetectorElectronic Features Delay Relay Outputs:Output A: Limited Presence True Presence™ Output B: Presence (Duplicates Output A) Pulse-on-Entry Pulse-on-Exit Delay Outputs A & B for two seconds Eight levels of sensitivity selectable from PCB mounted DIP switches No external DIP switches Sensitivity Boost for applications where high-bed vehicles might be encountered Detect Memory feature maintains detection during momentary power interruptions of up to two seconds Fail LED indicates current loop failures or loop failures that have occurred Four loop frequencies selectable from the front panel Loop Fail Memory stores a record of the last loop failure Super bright LED indicators for power, detect, loop fail, and frequency setting 11-pin Amphenol or 10-pin MS connector Fail-Safe or Fail-Secure versions available GENERAL SPECIFICATIONS |
 |
Reno A&E BX Series Loop DetectorElectronic Features Delay Relay Outputs:Output A: Limited Presence True Presence™ Output B: Presence (Duplicates Output A) Pulse-on-Entry Pulse-on-Exit Fault Output Delay Outputs A & B for two seconds Eight levels of sensitivity selectable from the front panel rotary switch External DIP switches Sensitivity Boost for applications where high-bed vehicles might be encountered Detect Memory feature maintains detection during momentary power interruptions of up to two seconds Fail LED indicates current loop failures or loop failures that have occurred Four loop frequencies selectable from the front panel Super bright LED indicators for power, detect, and loop fail 11-pin Amphenol connector Fail-Safe or Fail-Secure versions available GENERAL SPECIFICATIONS |
 |
Reno A&E BX Series Loop Reno A&E Model 802 11-Pin Harness (with slip jacket)Electronic Features Use with Model AX, AX2, AX3, B & BX Series.GENERAL SPECIFICATIONS |
 |
Standard Universal Gang Box by Pach & CompanyElectronic Features Use to mount Pach & Company GENERAL SPECIFICATIONS |
